Scheduled Presentations...

• Miller, S. A. “TBD” invited oral presentation, 2025 Spring National ACS Meeting, Graduate Student Symposium (GSS), San Diego, California, March 25, 2025.
https://sites.google.com/tamu.edu/gsspc2025

• Miller, S. A. “TBD” invited oral presentation, 2025 International Conference on Materials for Advanced Technologies (ICMAT), Singapore, June 30 - July 4, 2025.
https://icmat2025.mrs.org.sg/5
https://icmat2025.mrs.org.sg/symposia-t/

215. Miller, S. A. “Ocean Digestible Bioplastics,” invited oral presentation, Highlands in Chemistry Seminar Series, Virginia Tech, Department of Chemistry, November 3, 2023.
https://chem.vt.edu/about-us/highlands.html

214. Miller, S. A. “Upcycled Polymers: The Obvious and Less Obvious,” invited oral presentation, Sustainable Polymers 2023, Safety Harbor, Florida, October 15-18, 2023.
https://www.polyacs.net/23spprogram

213. Miller, S. A. “Nylon Hybrids from Plants or PET,” contributed oral presentation, 2023 Fall National ACS Meeting, Chemical Recycling and Upcycling of Polymers, San Francisco, California, August 15, 2023.
https://acs.digitellinc.com/sessions/579686/view

212. Miller, S. A. “Ocean Digestible Bioplastics,” invited oral presentation, 27th Annual Green Chemistry & Engineering Conference, Long Beach, California, June 15, 2023 (virtual).
https://gcande.digitellinc.com/live/10/page/204/1?eventSearchInput=Stephen+Miller

211. Miller, S. A. “Sustainable Polymers,” invited oral presentation, REWOOD Launch Meeting, Georgia Institute of Technology, Atlanta, Georga, April 28, 2023 (virtual).

210. Miller, S. A. “Sustainable Polymers from Native Silicon,” invited oral presentation, Green Polymer Chemistry and Sustainability Symposium, POLY, Fall National ACS Meeting, Chicago, Illinois, August 21, 2022.
https://acs.digitellinc.com/sessions/523315/view

209. Miller, S. A. “Expanding Loop Chemical Recycling of PET,” contributed oral presentation, Design of Polymers toward Upcycling Symposium, POLY, Fall National ACS Meeting, Chicago, Illinois, August 21, 2022.
https://acs.digitellinc.com/sessions/523536/view

208. Miller, S. A. “Ocean Digestible Bioplastics,” invited oral presentation, International Workshop of MOONSHOT-ItoPJ, University of Tokyo, Japan, August 5, 2022 (virtual).
http://www.moonshot.k.u-tokyo.ac.jp/en/index.html

207. Miller, S. A. “Ocean Digestible Bioplastics,” invited oral presentation, Polymer and Advanced Materials (PAM) Lecture, School of Polymer Science & Polymer Engineering, University of Akron, January 14, 2022 (in-person).
https://calendar.uakron.edu/polymer/event/18211-pam-lecture-prof-stephen-a-miller-university-of

206. Miller, S. A. “Ocean Digestible Bioplastics,” invited oral presentation, 2021 POLY PMSE Student Chapter Macromolecular Summer Seminar Series, University of Florida, August 26, 2021 (virtual).
https://mobile.twitter.com/ufpolypmse/status/1430894021199622148/photo/1

205. Miller, S. A. “Ocean Digestible Bioplastics,” invited oral presentation, IUPAC-MACRO 2020+, Jeju Island, Korea, May 18, 2021 (virtual).
http://macro2020.org/sub/catalog.php?CatNo=18

204. Miller, S. A. “Ocean Digestible Bioplastics,” invited oral presentation, 2021 Bio-Environmental Polymer Society (BEPS) Conference, Rowan University, Glassboro, NJ, June 23, 2021 (virtual).
http://www.beps.org/meetings/index.html

203. Miller, S. A. “Programming the Properties and Degradation of Biopolymers for Packaging Applications,” invited oral presentation, ExxonMobil, Baytown, Texas, February 12, 2021 (virtual).
https://corporate.exxonmobil.com/Locations/United-States/Baytown-area-operations-overview

202. Miller, S. A. “Programming the Properties and Degradation of Biopolymers for Packaging Applications,” invited oral presentation, King Abdulaziz University, Jeddah, Saudi Arabia, November 23, 2020 (virtual).
https://chem.kau.edu.sa/

201. Miller, S. A. “Seeding the polymer industry with carinata,” invited oral presentation, 7th Carinata Biomaterials Summit & 3rd SPARC Annual Meeting, University of South Florida, Tampa, Florida, February 27, 2020.

200. Miller, S. A. “Programming the Properties and Degradation of Biopolymers for Packaging Applications,” invited oral presentation, 4th International Symposium on Materials from Renewables (ISMR), University of Georgia, Athens, Georgia, October 9, 2019.
https://newmaterials.uga.edu/2019-international-symposium-on-materials-from-renewables-ismr/

199. Miller, S. A. “Programming the Properties and Degradation of Biopolymers for Packaging Applications,” invited oral presentation, BIOPOL2019, 7th International Conference on Biobased and Biodegradable Polymers, KTH Royal Institute of Technology, Stockholm Sweden, June 19, 2019.
https://www.biopol-conf.org/

198. Miller, S. A. “Designing polymers for coherent depolymerization,” invited plenary presentation, U.S. Department of Energy Roundtable, Chemical Upcycling of Polymers, Bethesda, Maryland, April 30, 2019.

197. Miller, S. A. “Weak link strategies for polymer degradation,” invited oral presentation, The Fate of Plastics in Water, 257th National ACS Meeting, Orlando, Florida, March 31, POLY 18, 2019.
https://plan.core-apps.com/acsorlando2019/abstract/464b511e-412f-4904-a1f0-c76139bd26b5

196. Miller, S. A. “Bioplastics from the Carinata Biomill,” invited oral presentation, 6th Carinata Biomaterials Summit & 2nd SPARC Annual Meeting, IFAS-NFREC, Quincy, Florida, March 5, 2019.

195. Miller, S. A. “Programming the Properties and Degradation of Sustainable Polymers,” invited oral presentation, Danimer Scientific, Bainbridge, Georgia, March 4, 2019.
https://danimerscientific.com/

194. Miller, S. A. “Programming the Properties and Degradation of Sustainable Polymers,” invited oral presentation, University of Georgia, Athens, Georgia, October 18, 2018.
https://www.chem.uga.edu/

193. Miller, S. A. “Programming the Properties and Degradation of Sustainable Polymers,” invited oral presentation, Mississippi State University, Starkville, Mississippi, September 21, 2018.
https://www.chemistry.msstate.edu/

192. Miller, S. A. “Sustainable Polymers from Bioaromatics,” invited oral presentation, Chaire Agro-Biotechnologies Industrielles (ABI) at the CEBB (European Center for Biotechnology and the Bioeconomy), Bazancourt (near Reims), France, July 11th, 2018.
https://www.chaire-abi-agroparistech.com/
http://www.cebb-innovation.eu/

191. Miller, S. A. “Obvious and non-obvious bioaromatics for polymerization,” invited oral presentation, 255th National ACS Meeting, New Orleans, LA, March 21st, POLY 584, 2018.
https://plan.core-apps.com/acsnola2018/abstract/cffdcc8a-5126-4722-9bb2-5cf1a65c15b8

190. Miller, S. A. “Biofuel and biorenewables from the carinata biomill,” contributed oral presentation, 255th National ACS Meeting, New Orleans, LA, March 18th, ENFL 59, 2018.
https://plan.core-apps.com/acsnola2018/abstract/6f02edf9fa1f10ca80fb6786b0290d16
ENFL Most Oustanding Paper at the 255th ACS National Meeting / Richard A. Glenn Award
http://web.anl.gov/PCS/ENFL/Awards/RAGlennAward/RAGlennAward.html

189. Miller, S. A. “Polymers from the Carinata Biorefinery,” invited oral presentation, Carinata Biomaterials Summit 2018, Panama City, Florida, February 20th, 2018.
https://www.eventbrite.com/e/carinata-biomaterials-summit-2018-tickets-40186110739

188. Miller, S. A. “Programming the Properties and Degradation of Sustainable Polymers,” invited oral presentation, Green Chemistry Symposium, Southeast Regional ACS Meeting, SERMACS 2017, Charlotte, North Carolina, November 7, 2017.
http://www.sermacs2017.org/

187. Miller, S. A. “Programming the Properties and Degradation of Sustainable Polymers,” invited oral presentation, Baylor University, Waco, Texas, October 27, 2017.

186. Miller, S. A. “Sustainable polymers for packaging applications,” invited Webinar Presenter, ACS POLY Division, July 25, 2017.
https://www.youtube.com/watch?v=JvGbTjwISwk


185. Miller, S. A. “Programming the Properties and Degradation of Sustainable Polymers,” invited oral presentation, University of Minnesota, Minneapolis, April 25, 2017.
https://chem.umn.edu/event/student-seminar-series-professor-stephen-miller

184. Miller, S. A. “Programming the Properties and Degradation of Sustainable Polymers,” invited oral presentation, UF Soft Matter Applied Research and Technology Symposium (SMARTS), University of Florida, Gainesville, January 20, 2017.
http://tinyurl.com/smartsUF

183. Miller, S. A. “Design and Synthesis of Sustainable Polymers with Prescribed Thermal Properties and Degradation Behavior,” invited oral presentation, 1st M&M SYNTECH Unit International Meeting, Nagoya University, Japan, December 17, 2016.
http://www.chem.nagoya-u.ac.jp/

182. Miller, S. A. “Programming the Properties and Degradation of Sustainable Polymers,” invited oral presentation, The 11th Society of Polymer Science, Japan (SPSJ) International Polymer Conference (IPC2016), Fukuoka, Japan, December 15, 2016.
http://main.spsj.or.jp/ipc2016/index.html
http://main.spsj.or.jp/ipc2016/speakers.html

181. Miller, S. A. “Programming the Properties and Degradation of Sustainable Polymers,” invited oral presentation, Florida State University, Tallahassee, Florida, September 15, 2016.
https://www.chem.fsu.edu

180. Miller, S. A. “Building novel polyolefins with sterically expanded single-site catalysts,” invited oral presentation, TOTAL Cray Valley, Exton, Pennsylvania, September 14, 2016.
http://www.crayvalley.com/

179. Miller, S. A. “Programming the Properties and Degradation of Sustainable Polymers,” invited oral presentation, TOTAL Cray Valley, Exton, Pennsylvania, September 14, 2016.
http://www.crayvalley.com/

178. Miller, S. A. “Next Generation Packaging Plastics: Renewability, Degradability, and Scalability,” invited oral presentation, International Symposium on Materials from Renewables, Fargo, North Dakota, July 19-20, 2016.
https://www.ndsu.edu/conferences/ismr/

177. Miller, S. A. “Programming the Thermal Properties and Degradation Behavior of Renewable Polyesteramides and Polysilicon Acetals,” invited oral presentation, Sustainable Polymers II, ACS Division of Polymer Chemistry Conference, Clearwater, Florida, May 23, 2016.
http://sustainablepolymers2016.org

176. Miller, S. A. “Programming the Properties and Degradation of Sustainable Polymers,” invited oral presentation, University of Houston, Houston, Texas, March 1, 2016.
http://www.chem.uh.edu

175. Miller, S. A. “Expanding the thermal properties of bioplastics,” contributed oral presentation, Pacifichem 2015, Hawaii Convention Center, Honolulu, Hawaii, December 17, 2015.
http://www.pacifichem.org/

174. Miller, S. A. “Commodity-scale phytochemicals from the lignocellulose of megacrops,” contributed oral presentation, Pacifichem 2015, Hawaii Convention Center, Honolulu, Hawaii, December 15, 2015.
http://www.pacifichem.org/

173. Miller, S. A. “Building novel polyolefins with sterically expanded single-site catalysts,” invited lecture, 14th Pacific Polymer Conference, Grand Hyatt Resort and Spa, Kauai, Hawaii, December 10, 2015.
http://www.polyacs.net/workshops/PPC14/home.htm

172. Miller, S. A. “Improving Sustainable Polymers with Bioaromatics,” invited lecture, 14th Pacific Polymer Conference, Grand Hyatt Resort and Spa, Kauai, Hawaii, December 10, 2015.
http://www.polyacs.net/workshops/PPC14/home.htm

171. Miller, S. A. “Sustainable Materials from Plants and Sand,” invited oral presentation, United States Kavli Frontiers of Science Symposium, Irvine, California, November 5–7, 2015.
http://www.nasonline.org/programs/kavli-frontiers-of-science/past-symposia/2015-usfos.html
https://vimeo.com/145890011

170. Miller, S. A. “Polyesters from Biogenic Aromatics,” invited lecture, Bio-Environmental Polymer Society (BEPS), Karlsruhe, Germany, October 12-15, 2015.
http://www.meier-michael.com/beps.html

169. Miller, S. A. “Sustainable polysiloxanes via siloxane metathesis,” contributed oral presentation, 250th National ACS Meeting, Boston, August 16, 2015, POLY 35.
http://www.acs.org/content/acs/en/meetings/fall-2015.html
POLY: Silicones

168. Miller, S. A. “Programming the Properties and Degradation of Sustainable Polymers,” invited lecture, Université de Reims Champagne-Ardenne, Reims, France, June 30, 2015.
http://www.univ-reims.fr/

167. Miller, S. A. “Sustainable polymers for packaging applications,” invited lecture, AgroParisTech, Reims, France, June 29, 2015.
http://www.agroparistech.fr

166. Miller, S. A. “U.S. Bioplastics: Transforming agricultural waste into polyester (PET) and polystyrene (PS) mimics,” invited lecture, Visiting Professorship, Lecture#4, Balard Foundation, Montpellier, France, June 24, 2015.
http://www.polechimie-balard.fr/actualites/840/programme-intervention-stephen-miller-juin-2015.htm

165. Miller, S. A. “Controlling the properties of sustainable polymers,” invited lecture, Visiting Professorship, Lecture#3, Balard Foundation, Montpellier, France, June 22, 2015.
http://www.polechimie-balard.fr/actualites/840/programme-intervention-stephen-miller-juin-2015.htm

164. Miller, S. A. “Sustainable polymers: Opportunities for the next decade,” invited lecture, Visiting Professorship, Lecture#2, Balard Foundation, Montpellier, France, June 18, 2015.
http://www.polechimie-balard.fr/actualites/840/programme-intervention-stephen-miller-juin-2015.htm

163. Miller, S. A. “Innovation and Sustainable Polymers,” invited lecture, Young Scientist Workshop at the International Biorefinery for Food, Fuels and Materials Symposium (BFFM), Montpellier, SupAgro, France, June 17, 2015.
http://www.bffm2015-congress.eu/workshop.html

162. Miller, S. A. “Polyesters from megacrop phytochemicals,” invited lecture, International Biorefinery for Food, Fuels and Materials Symposium (BFFM), Montpellier, SupAgro, France, June 15, 2015.
http://www.bffm2015-congress.eu/

161. Miller, S. A. “Building novel polyolefins with sterically expanded single-site catalysts,” invited lecture, Visiting Professorship, Lecture#1, Balard Foundation, Montpellier, France, June 12, 2015.
http://www.polechimie-balard.fr/actualites/840/programme-intervention-stephen-miller-juin-2015.htm

160. Miller, S. A. “Bioplastics vs. Traditional Packaging Plastics,” invited oral presentation, University of Florida Society for Biomaterials?, Biomaterials Day 2015, Gainesville, Florida, March 27, 2015.
http://www.uflbiomaterials.org/#!biomaterials-day-2015/ctnx

159. Miller, S. A. “Phytochemicals from Cellulosic Bioethanol Waste Streams,” invited poster presentation, Consortium for Plant Biotechnology Research (CPBR) Symposium, Washington, D.C., March 3-4, 2015.
http://www.cpbr.org

158. Miller, S. A. “Programming the Properties and Degradation of Sustainable Polymers,” invited oral presentation, Sultan Qaboos University, Muscat, Oman, December 16, 2014.
http://www.squ.edu.om

157. Miller, S. A. “Sustainable Polymers from Agricultural Waste,” invited flash and poster presentation, 2nd Arab-American Frontiers of Science, Engineering, and Medicine Symposium, Muscat, Oman, December 13-15, 2014.
http://sites.nationalacademies.org/PGA/dsc/AAFrontiers
https://www.facebook.com/ArabAmericanFrontiers

156. Miller, S. A. “Transforming Agricultural Waste into Polyethylene Terephthalate (PET) Mimics,” invited oral presentation, Frontiers in Biorefining: Chemicals and Products from Renewable Carbon, St. Simons Island, Georgia, October 21-24, 2014.
http://www.frontiersinbiorefining.org/

155. Miller, S. A. “Programming the Properties and Degradation of Sustainable Polymers,” invited oral presentation, TUBITAK Visiting Professor Lecture Series, Yildiz Technical University, Istanbul, Turkey, September 11, 2014.

154. Miller, S. A. “Programming the Properties and Degradation of Sustainable Polymers,” invited oral presentation, TUBITAK Visiting Professor Lecture Series, Ankara University, Ankara, Turkey, September 10, 2014.

153. Miller, S. A. “Programming the Properties and Degradation of Sustainable Polymers,” invited oral presentation, TUBITAK Visiting Professor Lecture Series, Nigde University, Nigde, Turkey, September 8, 2014.

152. Miller, S. A. “Polyesters from Bio-aromatics,” contributed oral presentation, 248th National ACS Meeting, San Francisco, August 13, 2014, POLY 622.
https://www.acs.org/content/acs/en/meetings/fall-2014.html
Green Polymer Chemistry: Biobased Materials and Biocatalysis

151. Miller, S. A. “Green Chemistry: Sustainable Polymers from Biorenewable Feedstocks,” invited oral presentation, Inaugural New Horizons in Science Symposium, for the countries of Mexico, Canada, and the United States, Mexico City, Mexico, June 22-23, 2014.
http://www.ianas.org/newhorizonsinscience/
http://www.ianas.org/newhorizonsinscience/green_chemistry.html#participants

150. Miller, S. A. “U.S. Bioplastics: Polyesters from Sugarcane Waste,” invited oral presentation, Green Chemistry & Engineering Business Plan Competition, North Bethesda, Maryland, June 18, 2014.
http://www.gcande.org/program/2014-gce-business-plan-competition/
http://www.gofundme.com/GCEBizPlanComp

149. Miller, S. A. “Sustainable Polymers: How to Compete with Traditional Plastics,” invited oral presentation, Global Young Academy - Science Session, Pontificia Universidad Católica de Chile, Santiago, Chile, May 22, 2014.
http://gya-santiago2014.cl

148. Miller, S. A. “Status of the Young Scientist Ambassador Program (YSAP) Working Group,” invited oral presentation, Global Young Academy - General Assembly, Santiago, Chile, May 21, 2014.
http://www.globalyoungacademy.net

147. Miller, S. A. “Programming the properties and degradation behavior of environmentally responsible polymers,” invited oral presentation, High Polymer Research Group Conference 2014, Pott Shrigley, United Kingdom, April 27-May 1, 2014.
http://www.highpolymer.org.uk/

146. Miller, S. A. “Single-site catalysts for increasing the branch content of polyolefins,” invited oral presentation, 247th National ACS Meeting, Dallas, Texas, March 19, 2014. https://www.acs.org/content/acs/en/meetings/spring-2014.html

145. Miller, S. A. “Polyesters from bio-methanol,” contributed oral presentation, 247th National ACS Meeting, Dallas, Texas, March 16, 2014. https://www.acs.org/content/acs/en/meetings/spring-2014.html

144. Miller, S. A. “Synthesis and Characterization of New Polymers from Biorenewable Feedstocks,” invited oral presentation, International Symposium for Green-Innovation Polymers (GRIP2014) & The 13th Symposium of the Research Center for Highly Environmental and Recyclable Polymers, Japan Advanced Institute of Science & Technology, Kanazawa City, Japan, March 7, 2014.

143. Miller, S. A. “Sustainable Polymers: Controlling Thermal Properties and Degradation Behavior,” invited oral presentation, University of Tokyo, Japan, March 4, 2014.

142. Miller, S. A. “Programming the properties and degradation behavior of sustainable polymers,” invited oral presentation, PPG Industries, Coatings Innovation Center, Allison Park, Pennsylvania, January 28, 2014.

141. Miller, S. A. “Sustainable Polymers from Sugarcane Bagasse,” invited oral presentation, U.S. Sugar Corporation, Clewiston, Florida, October 31, 2013.

140. Miller, S. A. “Sustainable Polymers: Degradable Mimics of Commodity Polymers,” invited oral presentation, University of Florida, Materials Science and Engineering Department, October 9, 2013.

139. Miller, S. A. “Bio-based aromatics: Sustainable building blocks for replacing polyester and polystyrene ,” invited oral presentation, 4th International Symposium on Functional Materials Science, Shanghai Institute of Ceramics, Shanghai, China, September 27, 2013.
http://www.rsc.org/ConferencesAndEvents/RSCEvents/International/China/Unilever-2013/index.asp

138. Miller, S. A. “Programming the properties and degradation of renewable polyesters, polycarbonates, and polyoxalates,” invited oral presentation, 4th International Symposium on Functional Materials Science, University of Science and Technology of China, Hefei, China, September 25, 2013.
http://www.rsc.org/ConferencesAndEvents/RSCEvents/International/China/Unilever-2013/index.asp

137. Miller, S. A. “Water-degradable polyacetals from biorenewable feedstocks,” invited oral presentation, 4th International Symposium on Functional Materials Science, Peking University, Beijing, China, September 23, 2013.
http://www.rsc.org/ConferencesAndEvents/RSCEvents/International/China/Unilever-2013/index.asp

136. Miller, S. A. “Pinpointing the thermal properties of renewable polyesters derived from lignin,” invited oral presentation, 246th National ACS Meeting, Indianapolis, Indiana, September 11, 2013.
http://portal.acs.org/portal/PublicWebSite/meetings/fall-2013/index.htm
"Monomer and Polymer Mimicry with Renewables" a symposium co-organized with Robert Mathers
http://abstracts.acs.org/chem/246nm/meetingview.php?page=session&par_id=576

135. Miller, S. A. “Sustainable polymers: Bio-degradability vs. water-degradability,” invited oral presentation, National Science Council, Kaohsiung Medical University, Kaohsiung, Taiwan, July 25, 2013.

134. Miller, S. A. “Building novel polyolefins with sterically expanded single-site catalysts,” invited oral presentation, National Science Council, National Changhua University of Education, Changhua, Taiwan, July 23, 2013.

133. Miller, S. A. “Dialing the thermal properties of renewable polymers,” invited oral presentation, National Science Council, National Chung Hsing University, Taichung, Taiwan, July 22, 2013.

132. Miller, S. A. “Sustainable Polymers:  Dialing the Thermal Properties and Degradation Behavior,” invited oral presentation, Gordon Research Conference in Polymers, South Hadley, Massachusetts, June 12, 2013.
http://www.grc.org/programs.aspx?year=2013&program=polymers

131. Miller, S. A. “Programming the thermal properties and degradation pathways of renewable polyesters, polycarbonates, and polyacetals,” invited oral presentation, inaugural Sustainable Polymers ACS Division of Polymer Chemistry Conference, Safety Harbor, Florida, May 21, 2013.
http://polyacs.net/Workshops/13sustainable/home.htm

130. Miller, S. A. “Status of the Young Scientist Ambassador Program (YSAP) Working Group,” invited oral presentation, Global Young Academy - General Assembly, Halle (Saale), Germany, May 15, 2013.
http://www.globalyoungacademy.net/

129. Miller, S. A. “Redesigning Fossil Fuel-Based Plastics with Biorenewable Feedstocks,” invited oral presentation, UNICAMP - Universidade Estadual de Campinas, Sao Paulo, Brazil, April 29, 2013.
http://www.iqm.unicamp.br/eng/

128. Miller, S. A. “Pinpointing the thermal properties of renewable polycarbonates and polyoxalates,” oral presentation, POLY 562, 245th National ACS Meeting, New Orleans, Louisiana, April 11, 2013.
http://portal.acs.org/portal/PublicWebSite/meetings/spring2013/index.htm

127. Miller, S. A. “AAAS Science Podcast: Designing Bio-Friendly Plastics," American Association for the Advancement of Science (AAAS) Annual Meeting, Boston, Massachusetts, February 16, 2013.
http://www.sciencemag.org/site/multimedia/podcast/index.xhtml#130214
http://c778316.r16.cf2.rackcdn.com/SciencePodcast_130216c.mp3

126. Miller, S. A. “Redesigning Petroleum-Based Plastics with Renewable Feedstocks,” invited oral presentation, Symposium on "Sustainable Chemical Manufacturing in a Resource-Limited World," American Association for the Advancement of Science (AAAS) Annual Meeting, Boston, Massachusetts, February 16, 2013.
http://www.aaas.org/meetings/2013/

125. Miller, S. A. “Sustainable Polymers Designed to Compete with Petroleum-Based Commodity Thermoplastics,” invited oral presentation, Institute of Chemical and Engineering Sciences (ICES) Scientific Conference, Singapore, October 29, 2012.
http://icesconference.com.sg/speakers.php

124. Miller, S. A. “The Miller Reseach Group: New Polymers for the Commodity Plastics Market,” invited oral presentation, Saudi Basic Industries Corporation (SABIC), Riyadh, Saudi Arabia, September 12, 2012.
http://www.sabic.com

123. Miller, S. A. “Building Novel Polyolefins with Complex Catalysts,” invited oral presentation, 2nd KACST-Oxford Petrochemicals Forum, Riyadh, Saudi Arabia, September 10, 2012.
http://www.koprcsa.org/2012/en/indexen.asp

122. Miller, S. A. “Biobased Materials Designed to Compete with Petroleum-based Commodity Thermoplastics,” oral presentation, POLY 53, 244th National ACS Meeting, Philadelphia, Pennsylvania, August 19, 2012.
Green Polymer Chemistry: Biocatalysis and Biobased Materials

121. Miller, S. A. “Polymers from Sustainable Feedstocks,” invited oral presentation, Arizona Chemical Company, Savannah, Georgia, August 1, 2012.
http://www.arizonachemical.com/

120. Miller, S. A. “Competing Against Petroleum-based Plastics with Sustainable Feedstocks,” poster presentation, MACRO 2012, 44th World Polymer Congress, Blacksburg, Virginia, USA, June 26, 2012.
http://www.cpe.vt.edu/macro2012/

119. Miller, S. A. “Next-Generation Plastics from Plants Instead of Petroleum,” invited oral presentation, Department of Chemistry Leadership Board Meeting, Innovation HUB, Gainesville, Florida, June 22, 2012.
Read about the Department of Chemistry Leadership Board in the Spring 2011 Chemical Bond brochure.

118. Miller, S. A. “The Future of Sustainable Plastics,” Global Young Academy - Future of Chemistry Workshop, University of Pretoria, South Africa, May 24, 2012.
http://www.globalyoungacademy.net/gya-ga-2012-in-south-africa

117. Miller, S. A. “Bridging the International Scientific Gap: The Global Young Academy – Young Scientist Ambassador Program,” Invited Presentation, South African Young Academy of Science (SAYAS) Special General Assembly, Johannesburg, South Africa, May 22, 2012.
http://www.chem.ufl.edu/~miller/YSAP/
http://www.assaf.org.za/2012/05/international-young-scientists-converge-in-south-africa/

116. Miller, S. A. “Next-Generation Plastics from Plants Instead of Petroleum,” Invited Plenary Presentation, Global Young Academy - General Assembly, Johannesburg, South Africa, May 21, 2012.
http://www.globalyoungacademy.net/gya-ga-2012-in-south-africa

115. Miller, S. A. “Marine-degradable polyesters and fermentation-free polyesters,” invited oral presentation, Next-Generation Renewable Polymers, 243rd National ACS Meeting, San Diego, California, March 28, 2012.
http://portal.acs.org:80/portal/PublicWebSite/meetings/spring2012/index.htm

114. Miller, S. A. “Replacing Petroleum-Based Plastics:  Polymers from Sustainable Feedstocks,” invited oral presentation, Max Planck Institute for Polymer Research, Mainz, Germany, March 21, 2012.
http://www.mpip-mainz.mpg.de/

113. Miller, S. A. “Functional Group Metathesis Polymerization of Biorenewable Feedstocks,” invited oral presentation, 5th Workshop on Fats and Oils as Renewable Feedstock for the Chemical Industry, Karlsruhe, Germany, March 18-20, 2012.
http://abiosus.org/kit-workshop-2012.html

112. Miller, S. A. “Replacing Petroleum-Based Plastics:  Polymers from Sustainable Feedstocks,” invited oral presentation, Leibniz-Institut für Polymerforschung Dresden, Germany, March 15, 2012.
http://www.ipfdd.de/

111. Miller, S. A. “Plastics and Recycling,” invited oral presentation, J.J. Finley Elementary School, Gainesville, Florida, January 24, 2012.
http://www.sbac.edu/~finleyjj/index.html

110. Miller, S. A. “Next-Generation Commodity Plastics from Plants Instead of Petroleum,” invited oral presentation, National Science Foundation SusChEM Workshop, Arlington, Virginia, January 17-19, 2012.
http://engineering.ucsb.edu/suschem/

109. Miller, S. A. “Miller Research Group,” invited oral presentation, Presentation to Michelin Americas, Gainesville, Florida, October 25, 2011.
http://michelinman.com/michelincom/about-us/about-us-landing.page

108. Miller, S. A. “Building Polyolefins from Complex Catalysts and Evolving Polyolefins away from Petroleum,” invited oral presentation, Advances in Polyolefins 2011, Santa Rosa, California, September 25-28, 2011.
http://www.polyacs.net/Workshops/11Polyolefins/home.htm

107. Miller, S. A. “Legacy Plan for IAP/WEF Young Scientists,” invited Young Scientist Mentor, World Economic Forum/Annual Meeting of the New Champions, Dalian, China, September 14-16, 2011.
http://www.weforum.org/events/annual-meeting-new-champions-2011

106. Miller, S. A. “Biorenewable Polymers via Catalytic Functional Group Metathesis” invited oral presentation, ITB One Day Catalysis Symposium on "Catalysis Development Towards Sustainable Chemical Processes", Bandung, Indonesia, July 12, 2011.
http://www.itbcatalysis.or.id/

105. Miller, S. A. “Next-Generation Commodity Plastics from Plants Instead of Petroleum,” invited oral presentation, the Inaugural United States/Indonesia Kavli/US National Academy of Sciences Symposium, Bogor, Indonesia, July 9-11, 2011.
http://aipi.or.id/index.php/subMenu/372

104. Miller, S. A. “Polymers from Biorenewable Feedstocks,” poster presentation, Gordon Research Conference in Polymers, South Hadley, Massachusetts, June 12-16, 2011.
http://www.grc.org/programs.aspx?year=2011&program=polymers

103. Miller, S. A. “Replacing Petroleum-Based Plastics: Polymers from Biorenewable Feedstocks,” invited oral presentation, Center for Particulate and Surfactant Systems / Cytec Industries Symposium, University of Florida, Gainesville, Florida, April 14, 2011.

102. Miller, S. A. “Polyolefin construction with catalysts that favor alpha-olefins vs. ethylene,” invited oral presentation, Symposium on "New Synthetic Developments in Polyolefins and Metathesis-Based Polymers", 241st National ACS Meeting, Anaheim, California, March 27, 2011.

101. Miller, S. A. “Polymers from Biorenewable Feedstocks,” invited oral presentation, The Global Young Academy General Assembly, Berlin, Germany, March 20, 2011.

100. Miller, S. A. “Bridging the International Scientific Gap: The Young Scientist Ambassador Program,” invited oral presentation, The Global Young Academy General Assembly, Berlin, Germany, March 20, 2011.

99. Miller, S. A. “Plastics from Wood” invited oral/video presentation, WCJB-TV ABC, Gainesville, Florida, March 15, 2011.

98. Miller, S. A. “Exploiting a catalyst's affinity for alpha-olefins,” invited oral presentation, Pacifichem 2010, Honolulu, Hawaii, December 16, 2010.

97. Miller, S. A. “Biorenewable polyethylene terephthalate (PET) mimics derived from lignin,” invited oral presentation, Pacifichem 2010, Honolulu, Hawaii, December 15, 2010.

96. Miller, S. A. “Next Generation Commodity Polymers: Petroleum vs. Biomass,” invited oral presentation, Southern Methodist University, Dallas, Texas, October 22, 2010.

95. Miller, S. A. “Next Generation Commodity Polymers: Petroleum vs. Biomass,” invited oral presentation, University of Texas at Dallas, Texas, October 21, 2010.

94. Miller, S. A. “Sustainable polyethylene terephthalate (PET) mimics derived from lignin,” invited oral presentation, PepsiCo, Purchase, New York, October 18, 2010.

93. Miller, S. A. “Polyolefin Construction with Catalysts that Favor Alpha-Olefins vs. Ethylene,” invited oral presentation, Hebei University of Technology, Tianjin, China, September 17, 2010.

92. Miller, S. A. “The Next Generation of Green Plastics,” invited multi-media presentation, World Economic Forum/Annual Meeting of the New Champions, Science and Tech Zone, Tianjin, China, September 13-15, 2010.
http://www.weforum.org/events/annual-meeting-new-champions-2010

91. Miller, S. A. “Orthogonal control of butyl and long branching in linear low density polyethylene through tandem catalysis,” invited oral presentation, 240th National ACS Meeting, Boston, Massachusetts, August 22-26, 2010.

90. Miller, S. A. “Sustainable Polyethylene Terephthalate (PET) Mimics Derived from Lignin,” invited oral presentation, MACRO 2010, 43rd World Polymer Congress, Glasgow, United Kingdom, July 11-16, 2010.

89. Miller, S. A. “Tandem Catalyst System for Linear Low Density Polyethylene with Short and Long Branching,” oral presentation, MACRO 2010, 43rd World Polymer Congress, Glasgow, United Kingdom, July 11-16, 2010.

88. Miller, S. A. “Sustainable Polyethylene Terephthalate (PET) Mimics Derived from Lignin,” invited oral presentation, Florida Annual Meeting and Exposition (FAME) of the ACS, Tampa, Florida, May 13-15, 2010.

87. Miller, S. A. “Next Generation Thermoplastics from Biorenewable Feedstocks,” invited oral presentation, Rollins College, Winter Park, Florida, October 23, 2009.

86. Miller, S. A. “Future Thermoplastics from Single-Site Catalysts,” invited oral presentation, Advances in Polyolefins 2009, Santa Rosa, California, September 22, 2009.

85. Miller, S. A. “Polyesteracetals: Next Generation Thermoplastics from C1 Feedstocks,” poster presentation, Gordon Research Conference in Polymers (East), South Hadley, Massachusetts, June 24, 2009.

84. Miller, S. A. "Next Generation Thermoplastics:  Improving Polypropylene and Utilizing Biomass," invited oral presentation, Texas A&M University, College Station, Texas, April 17th, 2009.

83. Miller, S. A. "Next Generation Commodity Polymers:  Petroleum vs. Biomass," invited oral presentation, University of Maryland, College Park, Maryland, April 9th, 2009.

82. Miller, S. A. "Polyesteracetals via Ring-opening Polymerization," invited oral presentation, 10th Annual Florida Hetercyclic and Synthetic Conference, Gainesville, Florida, March 11, 2009.

81. Miller, S. A. "Next Generation Thermoplastics from Biorenewable Feedstocks," invited oral presentation, Japanese-American Kavli Frontiers of Science Symposium, National Academy of Sciences, Irvine, California, December 5, 2008.
http://vimeo.com/channels/kfoschemistry#33042266

80. Miller, S. A. "Polymers from Sustainable Economies: Utilization of Biorenewable Carbonyl Compounds," invited oral presentation, MACRO 2008, 42nd World Polymer Congress, Taipei, Taiwan, July 1, 2008.

79. Miller, S. A. "Sterically Expanded Transition Metal Catalysts for Olefin Polymerization," invited oral presentation, DSM, Geleen, the Netherlands, June 18, 2008.

78. Miller, S. A. "Future Thermoplastics from Single-Site Catalysts," invited oral presentation, RWTH Aachen, Germany, June 17, 2008.

77. Miller, S. A. "Branched Polyoxymethylene via Cationic Copolymerization of Trioxane with Cyclic Ethers," invited oral presentation, 9th Annual Florida Hetercyclic and Synthetic Conference, Gainesville, Florida, March 11, 2008.

76. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, Advances in Polyolefins 2007, Santa Rosa, California, September 25, 2007.

75. Miller, S. A. “Polymers from Alternative Economies,” poster presentation, Gordon Research Conference in Polymers (East), South Hadley, Massachusetts, June 20, 2007.

74. Miller, S. A.; Schwerdtfeger, E. D. “Highly syndiotactic copolymers of propylene and higher alpha-olefins,” invited oral presentation, 233rd ACS National Meeting, Chicago, IL, March 28, POLY 535, 2007.

73. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, ExxonMobil, Baytown Polymer Center, Baytown, Texas, February 27, 2007.

72. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, University of Akron, Akron, Ohio, January 23, 2007.

71. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, University of Florida, Gainesville, Florida, January 16, 2007.

70. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, Louisiana State University, Baton Rouge, Louisiana, December 18, 2006.

69. Miller, S. A. “A sodium-based catalyst for the highly efficient and controlled ring-opening polymerization of lactide,” invited oral presentation, Polymer Technology Industrial Consortium, Texas A&M University, November 3, 2006.

68. Miller, S. A.; Price, C. J.; Schwerdtfeger, E. D.; Zeits, P. D.; Launer, L. M. “Metallocene/MAO olefin polymerization: Catalyst reorganization vs. catalyst activity,” invited oral presentation, 62nd Southwest Regional Meeting of the American Chemical Society, Houston, Texas, October 20, 2006.

67. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, Texas A&M University, College Station, Texas, October 2, 2006.

66. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, University of Wyoming, Laramie, Wyoming, September 27, 2006.

65. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, Colorado State University, Fort Collins, Colorado, September 26, 2006.

64. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, Cornell University, Ithaca, New York, September 14, 2006.

63. Miller, S. A. “Polymers from Alternative Economies,” invited guest lecturer, NSF-REU Symposium Series, College Station, Texas, July 28, 2006.

62. Miller, S. A. “Catalysis in the Miller Research Group,” Texas Molecular/Sea Lion, invited oral presentation, College Station, TX, May 11, 2006.

61. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, University of Southern Mississippi, Hattiesburg, Mississippi, April 7, 2006.

60. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, University of Alabama, Tuscaloosa, Alabama, April 6, 2006.

59. Miller, S. A.; Irwin, L. J.; Price, C. J.; Schwerdtfeger, E. D.; Zeits, P. D. “Unusual Catalytic Behavior of a Sterically Expanded Constrained Geometry Catalyst,” invited oral presentation, ACS Award Symposium for James C. Stevens, 231st ACS National Meeting, Atlanta, GA, March 27, BMGT 10, 2006.

58. Miller, S. A.; Price, C. J.; Schwerdtfeger, E. D.; Irwin, L. J.; Zeits, P. D. “Steric Expansion of Transition Metal Catalysts: Steric versus Electronic Effects,” invited oral presentation, ACS Award Symposium for Richard R. Schrock, 231st ACS National Meeting, Atlanta, GA, March 26, INOR 3, 2006.

57. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, California Institute of Technology, Pasadena, California, March 17, 2006.

56. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, University of California at San Diego, San Diego, California, March 13, 2006.

55. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, North Carolina State University, Raleigh, North Carolina, February 8, 2006.

54. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, University of North Carolina, Chapel Hill, North Carolina, February 7, 2006.

53. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, Indiana University, Bloomington, Indiana, January 27, 2006.

52. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, Purdue University, West Lafayette, Indiana, January 26, 2006.

51. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, Eastman Chemical Company, Longview, Texas, January 16, 2006.

50. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, Dow Chemical Company, Freeport, Texas, December 2, 2005.

49. 49. Miller, S. A. “Polymer Chemistry at Texas A&M University: An Overview,” invited oral presentation, Dow Chemical Company, Freeport, Texas, December 2, 2005.

48. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, Total Petrochemicals, La Porte, Texas, November 17, 2005.

47. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, Advances in Polyolefins 2005, Rohnert Park, California, September 28, 2005.

46. Miller, S. A. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” Dow Chemical Company Presentation, Texas A&M University, College Station, Texas, August 18, 2005.

45. Miller, S. A.; Irwin, L. J.; Price, C. J.; Schwerdtfeger, E. D. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, Emory University, Atlanta, Georgia, August 12, 2005.

44. Miller, S. A.; Irwin, L. J.; Price, C. J.; Schwerdtfeger, E. D. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” poster presentation, Gordon Research Conference in Organometallic Chemistry, Salve Regina University, Newport, Rhode Island, July 11-12, 2005.

43. Miller, S. A.; Irwin, L. J.; Price, C. J.; Schwerdtfeger, E. D. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, Recent Advances in Single-Site Olefin Polymerization Catalysis Symposium, Texas A&M University, College Station, Texas, May 20, 2005.

42. Miller, S. A.; Irwin, L. J.; Schwerdtfeger, E. D.; Price, C. J. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, Polymer Technology Industrial Consortium, Texas A&M University, April 22, 2005.

41. Miller, S. A. “Next-Generation Single-Site Catalysts for Synthesizing Recyclable Polyolefins,” invited guest lecturer, American Chemical Society Student Affiliate Chapter Meeting, College Station, TX, January 27, 2005.

40. Miller, S. A. “Next-Generation Single-Site Catalysts for Olefin Polymerization,” invited oral presentation, Midwestern State University, Wichita Falls, Texas, November 12, 2004.

39. Miller, S. A.; Reich, B. J. E.; Justice, A. K.; Grill, J. M.; Goss, J. M.; Beckstead, B. T.; Reibenspies, J. H. “Expanding Cyanide Catalysis,” IUCCP Symposium, College Station, Texas, October 20, 2004.

38. Miller, S. A.; Irwin, L. J.; Schwerdtfeger, E. D.; Price, C. J. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, Polymer Technology Industrial Consortium, Texas A&M University, October 1, 2004.

37. Miller, S. A.; Irwin, L. J.; Schwerdtfeger, E. D.; Price, C. J. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” invited oral presentation, Gordon Research Conference in Organometallic Chemistry, Salve Regina University, Newport, Rhode Island, July 15, 2004.

36. Miller, S. A.; Irwin, L. J.; Schwerdtfeger, E. D.; Price, C. J. “Sterically Expanded Transition Metal Catalysts for Olefin Polymerization,” poster presentation, Gordon Research Conference in Organometallic Chemistry, Salve Regina University, Newport, Rhode Island, July 12-13, 2004.

35. Miller, S. A. “Single Site Catalysts for Olefin Polymerization,” invited guest lecturer, NSF-REU Symposium Series, College Station, Texas, June 11, 2004.

34. Miller, S. A. “Tacticity control with C₁-symmetric metallocenes: Syndiotactic-hemiisotactic polypropylene,” invited oral presentation, Southwest Catalysis Society Symposium, Houston, Texas, May 14, 2004.

33. Miller, S. A. “Tacticity control with C₁-symmetric metallocenes: Syndiotactic-hemiisotactic polypropylene,” invited oral presentation, MetCon2004, Houston, Texas, May 13, 2004.

32. Miller, S. A. “Syndiotactic-hemiisotactic Polypropylene from Metallocene Catalysts,” invited oral presentation, Polymer Technology Industrial Consortium, Texas A&M University, April 2, 2004.

31. Miller, S. A. “Syndiotactic-hemiisotactic polypropylene from metallocene catalysts,” oral presentation, 227th ACS National Meeting, Anaheim, CA, March 29, INOR 396, 2004.

30. Miller, S. A. “Carbon-carbon bond-forming reactions via cyanide-catalyzed aldimine coupling,” oral presentation, 227th ACS National Meeting, Anaheim, CA, March 28, ORGN 45, 2004.

29. Miller, S. A. “New Materials via Stereoselective Olefin Polymerizations,” invited oral presentation, 59th Southwest Regional Meeting of the American Chemical Society, Oklahoma City, Oklahoma, October 27, 2003.

28. Miller, S. A. “New Materials via Stereoselective Olefin Polymerizations,” invited oral presentation, Polymer Technology Industrial Consortium, Texas A&M University, October 10, 2003.

27. Miller, S. A. “Catalytic Formation of Carbon-Carbon Bonds,” invited guest lecturer, NSF-REU Symposium Series, College Station, Texas, July 25, 2003.

26. Miller, S. A. “Isotactic Block Length Distribution in Polypropylene: Bernoullian vs. Hemiisotactic,” poster presentation, Gordon Research Conference in Polymers (East), South Hadley, Massachusetts, June 18, 2003.

25. Miller, S. A. “Isotactic Block Length Distribution in Polypropylene: Bernoullian vs. Hemiisotactic,” invited poster presentation, Symposium on Recent Advances in Epoxidation Catalysis, College Station, Texas, May 16, 2003.

24. Miller, S. A. “Cyanide-Catalyzed Cyclizations via Aldimine Coupling,” invited poster presentation, Symposium on Recent Advances in Epoxidation Catalysis, College Station, Texas, May 16, 2003.

23. Miller, S. A. “Isotactic Block Length Distribution in Polypropylene: Bernoullian vs. Hemiisotactic,” invited oral presentation, IUCCP Board Meeting, College Station, Texas, May 15, 2003.

22. Miller, S. A. “Isotactic Block Length Distribution in Polypropylene: Bernoullian vs. Hemiisotactic,” invited oral presentation, MetCon2003, Houston, Texas, May 9, 2003.

21. Miller, S. A. “Synthesis and Application of Recyclable Polymers: Polymers 1 through 7,” invited guest lecturer, American Chemical Society Student Affiliate Chapter Meeting, College Station, TX, November 7, 2002.

20. Miller, S. A. “Enhancing Catalytic Activity with Steric Crowding,” poster presentation, Gordon Research Conference in Organometallic Chemistry, Salve Regina University, Newport, Rhode Island, July 24-25, 2002.

19. Miller, S. A. “Distal Ligand Effects in Metallocene-Mediated Olefin Polymerization,” invited oral presentation, Hungarian-American Workshop on Molecular Catalyst Design for Green Chemistry, Eötvös University, Budapest, Hungary, May 24, 2002.

18. Miller, S. A. “Organometallic Catalysts for Polymerizations and Small Molecule Transformations,” invited oral presentation, IUCCP Board Meeting, College Station, Texas, April 25, 2002.

17. Miller, S. A. “Distal Ligand Perturbations in Metallocene Mediated Olefin Polymerization,” invited oral presentation, Dow Chemical Company, Chemical Sciences Laboratory, Freeport, TX, February 26, 2002.

16. Miller, S. A. “Distal Ligand Perturbations in Metallocene Mediated Olefin Polymerization,” invited oral presentation, ExxonMobil Chemical Company, Baytown Polymers Center, Baytown, TX, January 11, 2002.

15. Miller, S. A. “Olefin Oligomerization Catalysis: New Avenues of Investigation,” invited oral presentation, Sasol Co., Ltd., Austin, Texas, November 26, 2001.

14. Miller S. A.; Schrock, R. R. “Asymmetric Ring Closing Metathesis (ARCM) with a Molybdenum Alkylidene Species Containing an Enantiomerically Pure Octahydrobinaphtholate Ligand,” poster presentation, International Symposium on Olefin Metathesis (ISOM), M.I.T., Cambridge, MA, August 5-6, 2001.

13. Miller, S. A.; Schrock, R. R. “Asymmetric Ring Closing Metathesis (ARCM) with a Molybdenum Alkylidene Species Containing an Enantiomerically Pure Octahydrobinaphtholate Ligand,” oral presentation, 221st ACS National Meeting, San Diego, CA, April 4, INOR 625, 2001.

12. Miller, S. A.; Bercaw, J. E. “Distal Ligand Perturbations in Metallocene Mediated Olefin Polymerization,” invited oral presentation, University of California at San Diego, January 26, 2001.

11. Miller, S. A.; Bercaw, J. E. “Distal Ligand Perturbations in Metallocene Mediated Olefin Polymerization,” invited oral presentation, Florida State University, January 15, 2001.

10. Miller, S. A.; Bercaw, J. E. “Distal Ligand Perturbations in Metallocene Mediated Olefin Polymerization,” invited oral presentation, University of Illinois (Urbana-Champaign), January 11, 2001.

9. Miller, S. A.; Bercaw, J. E. “Distal Ligand Perturbations in Metallocene Mediated Olefin Polymerization,” invited oral presentation, University of Kansas, January 8, 2001.

8. Miller, S. A.; Bercaw, J. E. “Distal Ligand Perturbations in Metallocene Mediated Olefin Polymerization,” invited oral presentation, Texas A&M University, December 7, 2000.

7. Miller, S. A.; Bercaw, J. E. “Distal Ligand Perturbations in Metallocene Mediated Olefin Polymerization,” invited oral presentation, Georgia Institute of Technology, November 20, 2000.

6. Miller, S. A.; Bercaw, J. E. “Metallocene Mediated Olefin Polymerization: The Effects of Distal Ligand Perturbation on Polymer Stereochemistry,” poster presentation, Advances in Polyolefins II, Napa Valley, CA, October 2000.

5. Miller, S. A.; Bercaw, J. E. “Isotactic Polypropylene Formation with C1-Symmetric Metallocene Catalysts,” oral presentation, 218th ACS National Meeting, New Orleans, LA, August, INOR 523, 1999.

4. Miller, S. A.; Bercaw, J. E. “Synthesis of Isotactic-Hemiisotactic and Syndiotactic-Hemiisotactic Polypropylene,” oral presentation, 217th ACS National Meeting, Anaheim, CA, March, INOR 19, 1999.

3. Miller, S. A.; Bercaw, J. E. “Highly Stereoregular Syndiotactic Polypropylene,” poster presentation, 217th ACS National Meeting, Anaheim, CA, March, INOR 151, 1999.

2. Miller, S. A.; Bercaw, J. E. “Amino-Fluorenide Derivatives of Group IV Metallocenes,” poster presentation, 213th ACS National Meeting, San Francisco, CA, April, INOR 196, 1997.

1. Miller, S. A.; Waymouth, R. M. “Diastereoselectivity in the Cyclopolymerization of alpha,omega-Olefins with Homogeneous Ziegler-Natta Catalysts,” poster presentation, 207th ACS National Meeting, San Diego, CA, April, INOR 130, 1994.